Major Single Skin Partitioning

An ideal solution where a high quality, economical partitioning system is required for manufacturing and storage areas.

 

 

Specification

Panels are constructed from 43 x 43 x 1.2 mm (18g) cold-rolled angles and 32 x 32 x 0.7 mm (22g) cold-rolled T bars with 0.8 mm (21g) CR4 mild steel or 50 x 50 x 3 mm (10g) weldmesh sheets, spot-welded into the framework.

Standard Panel Sizes

Height: 2400, 2700, 3000 mm
Width: 1000 mm
Dado Height: 1200 mm
Thickness: 43 mm

 

Mullion Sizes

50 x 50 x 2.5 mm – up to 2700 mm high
80 x 40 x 2.5 mm – 2700 mm and above 100 x 50 x 3.0 mm – to suit installation. All Two-Way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength, e.g. on clear access doors.

 

Glazing

A two-piece glazing system that can accommodate 4 mm to 6.4 mm glass, is supplied in 1828 mm and 2440 mm lengths to be cut and fitted on site. 6 mm toughened, 6.4 mm laminated and 6 mm Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required.

 

Paint Finishes

All panels are electrostatically powder-coated in the following standard colours: Grey 10 A 07, Grey 00 A 05, Sandstone 08 B 17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.

 

Accessories

A comprehensive range of accessories, including drop-down and sliding hatches, louvres, vents and locking systems are available to order.

 

 

Major Perforated Sheet Partitioning

A Quality Partitioning System where high security is required, but with light still able to pass through

framework

Constructed from 43 x 43 x 1.2 mm (18g) cold-rolled angles and 32 x 32 x 0.7 mm (22g) cold-rolled T-bars.

 

Perforated Sheet Panels

Panels have 0.75 mm mild steel sheet perforated with 3 mm holes on a 5 mm pitch, spot-welded into the framework.

 

 

Major Mesh Partitioning

This Partitioning System offers an ideal solution when a well-ventilated, secure area is required.The High Security option is particularly relevant to the storage of wines, spirits, tobacco, aerosols or bonded areas.

Framework

Constructed from 43 x 43 x 1.2 mm (18g) cold-rolled angles and 32 x 32 x 0.07 mm (22g) cold-rolled T-bars.

Standard Panels

Constructed with 50 x 50 x 3.0 mm (10g) weldmesh sheet spot-welded into the framework.

hight Security Panels

Constructed with 25 x 25 x 2.5 mm (12g) weldmesh or diamond section Expamet weldmesh sheets spot-welded into the framework
Request a free
Mezzanine Floor Quotation

Contact us

Your Name (required)

Your Email (required)

Subject

Your Message